FURNACE SAFETY ASSURANCE INSPECTION

Sullivan Heating & Cooling's Furnace Safety Assurance Inspection: A heating system that is not maintained is a problem waiting to happen. At the very least, operating costs could escalate due to inefficient use of fuel and the eventual need for repairs. In the worst case, improperly maintained equipment may compromise safety by causing dangerously high levels of CO, resulting in death or injury. There is some maintenance that homeowners can undertake themselves, such as the cleaning and replacing of filters. To ensure safe and efficient operation of a heating system, however, homeowners should have their furnace inspected and cleaned annually by a qualified service technician. Sullivan Heating & Cooling Will: Clean and Inspect Internal Condition of Heat Exchanger Clean and Inspect Main Burners, Gas Valve and Ignition System Clean and Inspect Draft Induced Blower Assembly Inspect the Venting System to Insure Proper Venting Inspect Blower Assembly and Check for Proper Operation Inspect Air Filter, Air Ducts and Check for Proper Air Flow Inspect and Tighten All Low and High Voltage Wiring Connections Inspect For Proper Installation and Operation of Thermostat Inspect All Safety Controls to Insure Proper Operation Lubricate Required Parts As Needed Complete General Cleaning Of Equipment But Sullivan Heating & Cooling Does Not Stop There, We Will Also: Perform A Complete Carbon Monoxide Test To Insure Safe Operation Perform A Complete Combustion Analysis and Record Burning Characteristics Adjust Burners and Combustion Air Based on Burning Characteristics Adjust Gas Vavle To Achieve Maximuim Efficiency of Equipment Perform Efficiency Test and Record Equipment Efficiency Visit http://www.buffaloheating.com/safety for more details Or call Sullivan Heating & Cooling at (716) 608-8139.. "Properly maintained home comfort systems last longer, have fewer breakdowns, and cost a lot less money to operate"